TFDi Design Icon
TFDi Design

Normal Checklist

Abbreviations

| Letter | Role | | --- | --- | --- | | C | Captain / Pilot Flying | | F | First Officer / Pilot Monitoring |

System Tests

Proper functionality of the following items should be verified propr to the first flight of the day:

  • Hydraulic System
  • EGPWS
  • Emergency power
  • Wing Ice Detection
  • Fuel System
  • Gear Warning
  • Stabiliser
  • Transponder/TCAS
  • Observer Oxygen Mask

Normal Checklist

Preflight

ItemState
Interior and Exterior InspectionCompleted (C)
Oxygen maskChecked (All)
Voice recorderChecked (C)
Cargo SmokeChecked (C)
Air conditioning panelSet (C)
Ice protection panelSet (C)
Annunciator lightsChecked (C)
Passenger signsOn (C)
Flight control panelSet (C)
Altimeters____, Cross Checked (Both)
Flight and Navigation InstrumentsChecked (Both)
Fire warningChecked (C)
Parking brakeSet (C)
Takeoff warningChecked (C)
Fuel SwitchesOff (C)
Radios and transponderSet (C)
RadarOff (C)
Aileron and rudder trimSet (C)
Flight attendant briefingCompleted (C)
Departure briefingCompleted (C)
Logbook and QRHsOnboard (C)
Fuel Required____, Verified (Both)

Pushback

ItemState
DoorsClosed (F)
Hydraulic Pumps (all)On (F)
Fuel panelSet (F)
TransponderAs required (F)
Ice protectionAs required (C)
BeaconOn (C)
Parking BrakeReleased (C)

After Start

ItemState
Engine Anti-iceAs required (C)
Air conditioning panelSet (F)

Taxi

ItemState
Flaps__, Set (Both)
SpoilersArmed (F)
Takeoff speedsV1, VR, V2, Verified (Both)
Stabiliser trimSet (C)

Delayed After Start

ItemState
Engine Anti-iceAs required (C)
Air conditioning panelSet (F)

Before Takeoff

ItemState
Departure runwayVerified (Both)
Flaps__, Set (Both)
Takeoff briefingCompleted (C)
Brake temperatureChecked (F)
Flight controlsFree and correct (Both)
EADChecked (F)
TransponderTA/RA (F)
Landing lightsOn (C)
Flight attendantsNotified and acknowledged (F)

After Takeoff

ItemState
Landing gearUp (F)
Hydraulic aux/trans pump switchesOff (F)
APUOff (F)
FlapsUp (F)
Flap takeoff selector5 (F)
SpoilersDisarmed (F)
EADChecked (F)

Climb

ItemState
Landing lightsOff (C)
AltimetersSet standard, Cross-checked (Both)

Descent

ItemState
AltimetersSet and cross-checked (Both)
MinimumsSet and cross-checked (Both)
Landing dataVerified (C)
Approach briefingCompleted (C)
Hydraulic aux/trans pump switchesOn (Both)
Ice protectionAs required (C)
Seatbelt signOn (C)

Approach

ItemState
Flight and navigation instrumentsVerified (Both)
CabinNotified (C)
AltimetersSet and cross-checked (Both)

Landing

ItemState
Landing gearDown, 3 Green (Both)
Flaps__, Set (Both)
SpoilersArmed (F)
EADChecked (F)

After Landing

ItemState
SpoilersRetracted (F)
FlapsUp (F)
RadarOff (F)
TransponderAs required (F)
APUAs required (F)
Landing lightsOff (F)
Taxi lightsOn (F)

Shutdown / Parking

ItemState
Parking brakeSet (C)
Seatbelt signOff (F)
Hydraulic aux/transfer pump switchesAs required (F)
Air conditioning panelAs required (F)
Fuel panelAs required (F)
Ice protectionOff (F)
BeaconOff (F)
Fuel switchesOff (C)

Ensure that all of the following items are checked before completing the leg:

  • Enter ACARS information
  • Make logbook entries
  • Check oxygen, engine oil, and hydraulic quantities
  • Check STATUS messages
  • Shutdown APU, unless required

Secure

ItemState
IRS mode selectorsOff (C)
Galley powerOff (F)
Pack switchesOff (C)
Emergency lightsOff (C)
APU/External PowerAs required (C)
Emergency powerOff (C)
Battery switchOff (C)

This checklist is for flight simulation use only. Do not use for real world operations.